How to Install

STEP 1: Prepare a flat and level base to support the E-Z step(s). A 4" thick concrete slab is recommended.

STEP 2: If more than one step is used, then risers should be installed as needed. Always apply concrete adhesive to bond step/riser to concrete slab.

STEP 3: Set steps in place starting with the lowest step first. Always apply concrete adhesive between step and riser on each level.

STEP 4: The second step should overlap the back of the first step.

STEP 5: The third step should overlap the back of the second step.

STEP 6: After completing installation, joints may be filled with mortar or concrete caulk if desired.